Jensen VM9115 Operating Instructions Manual page 9

VM9115
Monitor.Movement.Mechanism
If an obstruction occurs in the monitor path, the following protective measures
can be executed to prevent damage to the mechanism or monitor:
Obstruction
Monitor loading
out horizontally
Monitor loading in
horizontally
Monitor loading
out vertically
Monitor loading in
vertically
After the protective procedure is executed, normal operation is resumed by
pressing the OPEN button or disconnecting and reconnecting the power.
TFT.Aspect.Ratio
With the monitor open, press and hold the WIDE button on the monitor to adjust
the aspect ratio as follows:
FULL
The entire screen is extended horizontally to the aspect ratio of 16 to 9. The
extension ratio is the same at any point.
STANDBY
The screen becomes black. Touch the screen to resume.
Table.1:.Monitor.Protective.Measures
Self.Protection
Monitor is
automatically
loaded into unit
Unit stops at
obstruction point
Unit stops at
obstruction point
Unit stops at
obstruction point
OPEN.Button.
Pressed
Monitor fully
extended
horizontally
Monitor fully
extended
horizontally
Monitor swivels
back to the unit
Monitor swivels
back to the unit
Power.
Reconnected
Monitor is
automatically
loaded into unit
Monitor is
automatically
loaded into unit
Monitor swivels
back to the unit
Monitor swivels
back to the unit
9