Jensen VM9115 Operating Instructions Manual page 53

VM9115
Problem
Flashing image or
interference appears
on screen
Prolonged image or
improper height/
width ratio display
Monitor stops at
incorrect position
TUNER
Weak station
searching
DISC
Cannot insert disc
Image blurred,
distorted, or dark
Disc does not play
back
Cause
DVD is not compatible
with current TV system
settings
Improper video signal
connections
Improper aspect ratio
setup
Moving path is blocked
Auto antenna is not fully
extended
Auto antenna not
properly connected
LOCAL function is
activated
Disc already inside unit
Disc is illegally copied
Disc is warped or
scratched
Disc is dirty or wet
Laser pickup is dirty
Incompatible disc is
used
Disc rating exceeds
Parental Lock rating
limit
Disc region code is not
compatible with unit
Disc is inserted upside
down
Corrective.Action
Change setup to
accommodate disc
Check wiring and correct
Use correct aspect ratio
setting
Press OPEN key to restart
monitor movement
Connect the auto antenna
control cable properly
Connect the auto antenna
control cable properly
Turn LOCAL function off
Eject current disc and insert
new one
Use original disc
Use disc in good condition
Clean disc with soft cloth
Clean laser pickup with
cleaning disc
Use compatible disc
Change Parental Lock
settings to lower restriction
Use disc with proper region
code
Insert disc with label side up
53