Using.the.tft.monitor - Jensen VM9115 Operating Instructions Manual

USING.THE.TFT.MONITOR

Opening/Closing.the.TFT.Monitor
Open TFT Monitor
Press the OPEN button on the front panel to activate the mechanism that moves
the display panel into the viewing position.
Close TFT Monitor
Press the OPEN button on the front panel to load the display panel back into the
compartment.
TFT.Monitor.Auto.Open
• If "TFT Auto Open" is "on" when the unit is turned on, the monitor automatically
moves to the viewing position.
• If "TFT Auto Open" is "off" when the unit is turned on, press the OPEN button to
move the monitor into the viewing position.
• If "TFT Auto Open" is set to "Manual", the TFT will not close when the key is
turned off.
Monitor.Tilt.Angle.Adjustment
A known characteristic of TFT panels is the quality of the display in relationship to
the viewing angle. The adjust the monitor angle optimum viewing:
Press the TILT button on the unit.
1.
2. While the blue tilt icon is flashing, turn the rotary encoder to adjust the screen
angle.
8
VM9115