Connecting Power; Connecting A Cable Or Satellite Box - Insignia NS-19LD120A13 User Manual

Insignia 19" LCD TV/DVD Combo

Connecting power

To connect the power:
• Connect the AC power cord to the AC jack on the
back of your TV/DVD combo, then connect the
other end to a power outlet.
Cautions
• Your TV/DVD combo should only be operated
from the power source indicated on the label.
• Always unplug the AC power cord from the
power outlet when you will not be using your
TV/DVD combo for an extended period of time.

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than
one connection type. To get the best video, you
should use the best connection type available. For
more information, see
use?" on page 8.
Using HDMI (best)
To connect a cable or satellite box using HDMI:
1 Make sure that your TV/DVD combo's power
2 Connect the incoming cable from the cable wall
3 Connect an HDMI cable (not provided) to the
4 Plug your TV/DVD combo's power cord into a
5 Go through the Setup Wizard on page 19.
www.insigniaproducts.com
"What connection should I
cord is unplugged, and all connected
equipment is turned off.
jack to the cable-in jack on the cable or satellite
box.
HDMI jack on the side of your TV/DVD combo
and to the HDMI OUT jack on the cable or
satellite box.
Cable or satellite box
Side of TV
power outlet, turn on your TV/DVD combo, then
turn on the cable or satellite box.
Note
An HDMI cable carries both audio and video. You do
not need to use any audio cables.
9