Connecting A Home Theater System With Multiple Devices; Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Insignia NS-19LD120A13 User Manual

Connecting a home theater system with
multiple devices
Blu-ray player/DVD player/VCR
Camcorder/game console
USB flash drive
Computer
The connections you make depend on the video
and audio jacks available on your devices. Refer to
the documentation that came with your devices for
connection information.
Just remember to use the best connection types
available for the best picture and sound. For
information about connection types, see
connection should I
18
Cable/satellite box
AV receiver
Antenna or cable
TV connected
directly to the
wall jack
"What
use?" on page 8.
www.insigniaproducts.com
NS-19LD120A13 Insignia 19" LCD TV/DVD Combo

Using the remote control

Installing remote control batteries

To install remote control batteries:
1 While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off the remote control.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote
sensor on the front of your TV/DVD combo.
See "Front" on page 5 for the location of the remote
sensor.