Programming A Universal Remote Control To Work With Your Tv; Making Connections; Connecting The Power Cord; Connecting An Antenna, Cable Tv, Or Satellite Tv - Insignia NS-LDVD19Q-10A - 19" LCD TV User Manual

Programming a universal remote control to
work with your TV
You can operate your Insignia TV with a new or
existing universal remote control.
To program a universal remote control:
1 Find the code for your universal remote control
by identifying its model (or your set-top box's
remote control manufacturer and model) on the
charts below, then make note of the numbered
code below it. You will use the numbered code
to program your remote control to work with
your Insignia TV.
Insignia TV codes for universal remote controls
(for all Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control manufacturers and models
Philips PHDVD5, RCA
PH5DSS,
RCU807
PMDVR8, PDVR8
115 135
Set-top box manufacturers and models
Comcast Dish Network
M1057 VIP508, VIP622
0463 720
Codes for other remote controls are available online at:
www.insigniaproducts.com/universalcontrolcodes.aspx
Tips
• The brand name is often visible on the front of
the universal remote control, and the model
number is often visible on the back.
• If your universal remote control isn't listed on
the chart, refer to your universal remote
control's instructions and try codes for the
brands Orion, Emerson, Memorex, Sansui,
Sylvania, or Zenith. You may need to try several
codes before finding a match.
2 Follow your universal remote control's
instructions to enter the TV code you found in
Step 1.
Tips
• If your universal remote control has a code
search feature, run a code search to identify a
code that matches your TV. See your universal
remote control's instructions for details.
• If your universal remote control has a "Learn"
feature, you can manually program it using the
Insignia TV remote to "teach" the commands
one at a time. See your universal remote
control's instructions for details.
3 If all else fails, you must use a different universal
remote control that can operate both your
set-top box and your TV. Four such remotes are
listed on the chart, but many other compatible
models are available in the market.
For more help, call technical support for your
universal remote control or set-top box
manufacturer, or call the Insignia Customer Care
Center at 1-877-467-4289.
One for All Sony
URC-6690 RM-VL600
0464 8043
Motorola TIVO DirectTV
DRC800 Series 3, HD RC23
0463 0091 10463
www.insigniaproducts.com

Making connections

Connecting the power cord

To connect the power cord:
• Connect the power cord to the AC INPUT jack on
the back of your TV/DVD combo, then connect
the other end of the cable to a power outlet.
Warning
When your TV/DVD combo is turned off, power is still
flowing into it. To completely disconnect power,
unplug the power cord.
Connecting an antenna, cable TV, or
satellite TV
To connect an antenna, cable TV, or satellite TV:
1 Make sure that your TV/DVD combo is turned
off and the power cord is disconnected.
2 Connect one end of a coaxial cable to the ANT.
INPUT jack on the back of your TV/DVD combo,
then connect the other end to the antenna,
cable TV, or satellite TV jack.
HDMI1 INPUT
COMPONENT1 INPUT
Y C B /P B C R /P
Y C B /P B C R /P
COMPONENT2 INPUT
Antenna, cable TV, or satellite TV
connection
3 Turn on your TV/DVD combo.
4 Press INPUT on the remote control or the side of
your TV to display the input source menu, then
press INPUT repeatedly or press
TV. Press OK/ENTER.
Note
You can also press TV on the remote control to select
the TV.
Back of TV/DVD combo
ANT.
VGA INPUT INPUT
HDMI1 INPUT
~ 120V 60Hz AUDIO
COMPONENT1 INPUT AV1 INPUT S-VIDEO
A C I N P U T Y B C B /P R C R /P R AUDIO L AUDIO VIDEO AUDIO COAXIAL
L L OUTPUT
Y C B B /P C R R /P R AUDIO L R R AUDIO L R DVD VIDEO
COMPONENT2 INPUT S-VIDEO INPUT OUTPUT
VGA INPUT
AUDIO
AV1 INPUT
S-VIDEO
R R AUDIO L AUDIO VIDEO AUDIO COAXIAL
L L OUTPUT
R R AUDIO L R R AUDIO L R DVD VIDEO
S-VIDEO INPUT OUTPUT
or to select
ANT.
INPUT
9