Connecting A Usb Flash Drive - Insignia NS-19LD120A13 User Manual

Using HDMI
To connect a computer using HDMI:
1 Make sure that your TV/DVD combo's power
cord is unplugged and the computer is turned
off.
2 Connect an HDMI cable (not provided) to the
HDMI jack on the side of your TV/DVD combo
and to the HDMI OUT jack on the computer.
3 Plug your TV/DVD combo's power cord into a
power outlet, then turn on your TV/DVD combo
and the computer.
4 Press INPUT to open the Input Source list.
5 Press INPUT repeatedly or press
highlight HDMI, then press ENTER
6 Adjust the display properties on the computer,
if necessary.
16
Side of TV
or to
.
/
www.insigniaproducts.com
NS-19LD120A13 Insignia 19" LCD TV/DVD Combo

Connecting a USB flash drive

To connect a USB flash drive:
1 Plug a USB flash drive into the USB port on the
back of your TV/DVD combo.
Back of TV
Caution
• Do not remove the USB flash drive or turn off
your TV/DVD combo while using the USB flash
drive. You may lose data or damage the USB
flash drive.
• The USB flash drive must be less than 2.2 inches
(55 mm) in length. A longer flash drive will not
fit.
2 Turn on your TV/DVD combo.
3 Press INPUT to open the Input Source list.
4 Press INPUT repeatedly or press
highlight USB (Photos), then press ENTER
Note
The Photos viewer only supports JPEG format
images (with ".jpg" file extensions) and not all JPEG
files are compatible with your TV/DVD combo.
For more information, see
on page 37.
USB flash
drive
or to
.
/
"Using a USB flash drive"