Wake-Up Devices And Events - Intel BOXDX58OG Specification

Intel Desktop Board DX58OG Technical Product Specification
1.12.1.2

Wake-up Devices and Events

Table 8 lists the devices or specific events that can wake the computer from specific
states.
Table 8. Wake-up Devices and Events
These devices/events can wake up the computer...
LAN
PME# signal
Power switch
RTC alarm
USB
WAKE#
Consumer IR
Note 1: For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option
to Power On will enable a wake-up event from LAN in the S5 state.
Note 2: Wake from S4 and S5 is optional by the specification.
NOTE
The use of these wake-up events from an ACPI state requires an operating system
that provides full ACPI support. In addition, software, drivers, and peripherals must
fully support ACPI wake events.
30
...from this state
(Note 1)
S1, S3, S4, S5
(Note 1)
S1, S3, S4, S5
S1, S3, S4, S5
S1, S3, S4, S5
S1, S3
S1, S3, S4, S5
(Note 2)
S1, S3 (S4 and S5)