Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Intel BOXDX58SO2
Summary of Contents for Intel BOXDX58SO2
- Page 1 Intel® Desktop Board DX58SO2 Product Guide Order Number: G13825-001...
-
Page 2: Revision History
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. -
Page 3: Intended Audience
The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further evaluation by Intel. Document Organization The chapters in this Product Guide are arranged as follows:... - Page 4 Intel Desktop Board DX58SO2 Product Guide Terminology The table below gives descriptions of some common terms used in the product guide. Term Description Gigabyte (1,073,741,824 bytes) Gigahertz (one billion hertz) Kilobyte (1024 bytes) Megabyte (1,048,576 bytes) Megabit (1,048,576 bits) Megahertz (one million hertz)
-
Page 5: Table Of Contents
Contents 1 Desktop Board Features Supported Operating Systems................11 Desktop Board Components.................12 Processor......................14 Main Memory.....................15 ® Intel X58 Express Chipset..................16 Audio Subsystem ....................16 LAN Subsystem ....................17 USB 2.0 Support ....................18 Serial ATA......................18 Legacy I/O ......................19 Expandability.....................19 BIOS ........................19 Serial ATA and IDE Auto Configuration............19 PCI and PCI Express* Auto Configuration ............19... - Page 6 Flash Memory Update Utility or the ISO Image BIOS Update File ................66 Obtaining the BIOS Update File ..............66 Updating the BIOS with the Intel Flash Memory Update Utility......67 Updating the BIOS with the ISO Image BIOS Update File .........67 Recovering the BIOS ...................68...
- Page 7 Matrix Storage Technology ........69 Configuring the BIOS ..................69 Creating Your RAID Set ................69 Loading the Intel Matrix Storage Technology RAID Drivers and Software ....70 Setting Up a “RAID Ready” System ...............70 Configuring for External RAID Using Marvell* Storage Technology......71 Configuring the BIOS ..................71 Creating Your RAID Set ................71...
- Page 8 27. Location of the BIOS Configuration Jumper Block ..........56 28. Removing the Battery ...................62 29. Installing the WiFi/Bluetooth Module ...............64 30. POST Code LED Display .................75 31. Intel Desktop Board DX58SO2 China RoHS Material Self Declaration Table....84 Tables 1. Feature Summary..................9 2. Intel Desktop Board DX58SO2 Components............13 3.
-
Page 9: Desktop Board Features
1 Desktop Board Features ® This chapter briefly describes the features of Intel Desktop Board DX58SO2. Table 1 summarizes the major features of the Desktop Board. Table 1. Feature Summary ATX (304.80 millimeters [12.00 inches] x 243.84 millimeters Form Factor [9.60 inches]) - Page 10 Intel Desktop Board DX58SO2 Product Guide Table 1. Feature Summary (continued) LAN Support Gigabit (10/100/1000 Mb/s) dual LAN subsystem using the ® ® Intel 82567L and Intel 82574L Gigabit Ethernet Controllers ® BIOS • Intel Platform Innovation Framework for extensible firmware interface •...
-
Page 11: Supported Operating Systems
Desktop Board Features Supported Operating Systems • Microsoft Windows* 7 Ultimate 64-bit edition • Microsoft Windows 7 Ultimate 32-bit edition • Microsoft Windows 7 Professional 64-bit edition • Microsoft Windows 7 Professional 32-bit edition • Microsoft Windows 7 Home Premium 64-bit edition •... -
Page 12: Desktop Board Components
Intel Desktop Board DX58SO2 Product Guide Desktop Board Components Figure 1 shows the approximate location of the major components on Intel Desktop Board DX58SO2. Figure 1. Intel Desktop Board DX58SO2 Components... -
Page 13: Intel Desktop Board Dx58So2 Components
Desktop Board Features Table 2. Intel Desktop Board DX58SO2 Components Label Description Front panel audio header PCI Express 1.1 x1 connector S/PDIF header PCI Express 2.0 x16 connector (x8 electrical) PCI bus connector PCI Express 2.0 x16 connector PCI Express 1.1 x1 connector PCI Express 2.0 x16 connector... -
Page 14: Processor
Intel Desktop Board DX58SO2 Product Guide Online Support For more information on Intel Desktop Board DX58SO2 consult the following online resources: • Intel Desktop Board DX58SO2 http://www.intel.com/products/motherboard/index.ht • Desktop Board Support http://www.intel.com/p/en_US/support?iid=hdr+supp • Available configurations for Intel http://ark.intel.com Desktop Board DX58SO2 •... -
Page 15: Main Memory
Main Memory NOTE ® To be fully compliant with all applicable Intel SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. -
Page 16: Intel X58 Express Chipset
Go to the following link or pages for more information about: • The location of the onboard audio headers, Figure 23 on page 48 • The signal names for the Intel High Definition Audio front panel header, page 49 • The back panel audio connectors, Figure 24 on page 53... -
Page 17: Lan Subsystem
• Two RJ-45 LAN connectors with integrated status LEDs The subsystem features: • CSMA/CD protocol engine • LAN connect interface between ICH10R and the Intel 82567LF Gigabit Ethernet LAN Controller • PCI bus power management Go to the following link for information about LAN software and drivers: http://www.intel.com/products/motherboard/index.htm... -
Page 18: Usb 2.0 Support
Intel Desktop Board DX58SO2 Product Guide Table 3 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 3. LAN Connector LEDs LED Color LED State Indicates Green LAN link is not established... -
Page 19: Legacy I/O
The board also provides two 3.0 Gb/s external SATA (eSATA) channels via back panel connectors. Legacy I/O Intel Desktop Board DX58SO2 includes an I/O controller that provides the following legacy I/O features: • Consumer Infrared (CIR) support • Low pin count (LPC) interface •... -
Page 20: Security Passwords
Intel Desktop Board DX58SO2 Product Guide Security Passwords The BIOS includes security features that restrict whether the BIOS Setup program can be accessed and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup and for booting the computer, with the following restrictions: •... -
Page 21: Hardware Management
Desktop Board Features Hardware Management The hardware management features of Intel Desktop Board DX58SO2 enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features including the following: • Fan speed monitoring and control •... -
Page 22: Software Support
Intel Desktop Board DX58SO2 Product Guide Software Support ACPI ACPI gives the operating system direct control over the power management and Plug and Play functions of a computer. The use of ACPI with the Desktop Board requires an operating system that provides full ACPI support. -
Page 23: Instantly Available Pc Technology
Desktop Board Features Instantly Available PC Technology CAUTIONS For Instantly Available PC technology, the 5 V standby line for the power supply must be capable of delivering adequate +5 V standby current. Failure to provide adequate standby current when using this feature can damage the power supply and/or effect ACPI S3 sleep state functionality. -
Page 24: Wake From Usb
Intel Desktop Board DX58SO2 Product Guide Figure 4. Location of the Standby Power Indicator For more information on standby current requirements for the Desktop Board, refer to the Technical Product Specification at h ttp://www.intel.com/products/motherboard/index.htm Wake from USB NOTE Wake from USB requires the use of a USB peripheral that supports Wake from USB and an operating system that supports Wake from USB. -
Page 25: Wake From Consumer Ir
Desktop Board Features Wake from Consumer IR Consumer IR device activity wakes the computer from an ACPI S3, S4, or S5 state. Onboard System Control Switches The board contains the following lighted button switches that can be used to control board operation: •... -
Page 26: Base Clock Frequency Increase Switch
Intel Desktop Board DX58SO2 Product Guide Base Clock Frequency Increase Switch This button switch can be used to overclock the board by increasing the processor’s Base Clock (BCLK) frequency by 1 MHz each time the switch is pressed. If the button is held down for approximately 0.5 seconds, the BCLK frequency will continue to... -
Page 27: Diagnostic/Status Leds
Desktop Board Features Diagnostic/Status LEDs The Desktop Board provides 11 LEDs that allow you to monitor the board’s progress through the BIOS POST along with other board activities and conditions (see Figure 6). Figure 6. Location of the Diagnostic/Status LEDs... -
Page 28: Diagnostic Leds
Intel Desktop Board DX58SO2 Product Guide Diagnostic LEDs At initial power on, the eight diagnostic LEDs are off. When the BIOS starts an activity such as memory initialization, the corresponding LED starts flashing. Once the activity has completed, the LED will remain on. Table 4 lists the LEDs and describes their function. -
Page 29: Cpu And Vr Hot Leds
Desktop Board Features CPU and VR Hot LEDs The following red LEDs (see Figure 6) indicate the status of the processor and the board’s voltage regulation circuitry: • The CPU LED (Figure 6, I) indicates an elevated temperature on the processor that could affect performance. - Page 30 Intel Desktop Board DX58SO2 Product Guide...
-
Page 31: Installing And Replacing Desktop Board Components
2 Installing and Replacing Desktop Board Components This chapter tells you how to: • Install the I/O shield • Install and remove the Desktop Board • Install and remove a processor • Install and remove memory • Install and remove a PCI Express x16 card •... -
Page 32: Installation Precautions
Intel Desktop Board DX58SO2 Product Guide Installation Precautions When you install and test the Intel Desktop Board, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: • Sharp pins on connectors • Sharp pins on printed circuit assemblies •... -
Page 33: Installing The I/O Shield
Installing and Replacing Desktop Board Components Installing the I/O Shield The Desktop Board comes with an I/O shield. When installed in the chassis, the shield blocks radio frequency transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis. Install the I/O shield before installing the Desktop Board in the chassis. -
Page 34: Installing And Removing The Desktop Board
Refer to your chassis manual for instructions on installing and removing the Desktop Board. Figure 8 shows the location of the mounting screw holes for Intel Desktop Board DX58SO2. Figure 8. Intel Desktop Board DX58SO2 Mounting Screw Hole Locations... -
Page 35: Installing And Removing A Processor
Installing and Replacing Desktop Board Components Installing and Removing a Processor Instructions on how to install the processor on the Desktop Board are given below. Installing a Processor CAUTION Before installing or removing a processor, make sure the AC power has been removed by unplugging the power cord from the computer;... -
Page 36: Lift The Load Plate
Intel Desktop Board DX58SO2 Product Guide 3. Lift the load plate as shown in Figure 10, A. Do not touch the socket contacts. Figure 10. Lift the Load Plate... -
Page 37: Remove The Processor From The Protective Processor Cover
Installing and Replacing Desktop Board Components 4. Remove the processor from the protective processor cover. Hold the processor only at the edges, being careful not to touch the bottom of the processor (see Figure 11). Do not discard the protective processor cover. Always replace the processor cover if the processor is removed from the socket. -
Page 38: Close The Load Plate
Intel Desktop Board DX58SO2 Product Guide 7. Close the load plate (Figure 13, A, B). As the load plate is closed, the socket cover (Figure 13, C) will pop off as shown. After the load plate is closed, engage the socket lever (Figure 13, D) under the latch. -
Page 39: Installing The Processor Fan Heat Sink
Installing and Replacing Desktop Board Components Installing the Processor Fan Heat Sink Intel Desktop Board DX58SO2 has mounting holes for a processor fan heat sink. For instructions on how to attach the processor fan heat sink to the Desktop Board, refer to the boxed processor manual or boxed thermal solution manual. -
Page 40: Removing The Processor
For instructions on how to remove the processor fan heat sink and processor, refer to the processor installation manual. Installing and Removing Memory Intel Desktop board DX58SO2 has six 240-pin DDR3 DIMM sockets arranged in three channels (A, B, and C). Each channel has two sockets as shown in the following illustrations. -
Page 41: Installing Dimms
Installing and Replacing Desktop Board Components Installing DIMMs To make sure you have the correct DIMM, place it on the illustration of the DDR3 DIMM in Figure 17. All the notches should match with the DDR3 DIMM. Figure 17. Use DDR3 DIMMs... -
Page 42: Installing A Dimm
Intel Desktop Board DX58SO2 Product Guide NOTE Using a DIMM with a voltage rating higher than 1.65 V may damage the processor. To install a DIMM, follow these steps: 1. Observe the precautions in "Before You Begin" on page 31. -
Page 43: Removing Dimms
Installing and Replacing Desktop Board Components Removing DIMMs To remove a DIMM, follow these steps: 1. Observe the precautions in "Before You Begin" on page 31. 2. Turn off all peripheral devices connected to the computer. Turn off the computer. 3. -
Page 44: Removing A Pci Express X16 Add-In Card
Intel Desktop Board DX58SO2 Product Guide Figure 19. Installing a PCI Express x16 Card Removing a PCI Express x16 Add-in Card Follow these instructions to remove a PCI Express x16 card from a connector: 1. Observe the precautions in "Before You Begin" on page 31. -
Page 45: Installing Linked Pci Express X16 Graphics Cards
Installing and Replacing Desktop Board Components Figure 20. Removing a PCI Express x16 Card Installing Linked PCI Express x16 Graphics Cards The Desktop Board supports the use of linked PCI Express x16 graphics cards with Nvidia* SLI* technology and ATI* CrossFireX* technology. When installing linked graphics cards in the PCI Express x16 connectors, refer to the card manufacturer’s instructions to determine correct card placement and interconnection. -
Page 46: Installing Linked Pci Express Graphics Cards
Intel Desktop Board DX58SO2 Product Guide 3. Place the second card in the secondary PCI Express x16 connector (Figure 21, A) and press down on the card until it is completely seated in the connector and the card retention notch on the card snaps into place around the retention mechanism pin on the connector. -
Page 47: Connecting The Serial Ata (Sata) Cables
Installing and Replacing Desktop Board Components Connecting the Serial ATA (SATA) Cables SATA cables support the Serial ATA protocol. Each cable can be used to connect one internal SATA drive to the Desktop Board. The blue connectors support SATA 6 Gb/s and lower transfer rates and the black connectors support SATA 3 Gb/s and lower transfer rates. -
Page 48: Connecting To The Internal Headers
Intel Desktop Board DX58SO2 Product Guide Connecting to the Internal Headers Before connecting cables to any of the internal headers, observe the precautions in “Before You Begin” on page 31. Figure 23 shows the location of the internal headers on Intel Desktop Board DX58SO2. -
Page 49: Front Panel Audio Header
Installing and Replacing Desktop Board Components Front Panel Audio Header Figure 23, A shows the location of the front panel audio header. Table 5 shows the pin assignments and signal names for the front panel audio header. Table 5. Front Panel Audio Header Signal Names Signal Name Signal Name PORT 1L... -
Page 50: Consumer Ir (Cir) Headers
Intel Desktop Board DX58SO2 Product Guide Consumer IR (CIR) Headers The Desktop Board has two CIR headers: the input or receiver header (Figure 23, F) and the output or emitter header (Figure 23, D). The receiver header consists of a filtered translated infrared input compliant with Microsoft CIR specifications and a “learning”... -
Page 51: Chassis Intrusion Header
Installing and Replacing Desktop Board Components Chassis Intrusion Header Figure 23, E shows the location of the chassis intrusion header. This header can be connected to a mechanical switch on the chassis to detect if the chassis cover is removed. Table 10 shows the pin assignments and signal names for the chassis intrusion header. -
Page 52: Alternate Front Panel Power Led Header
Intel Desktop Board DX58SO2 Product Guide Alternate Front Panel Power LED Header Figure 23, H shows the location of the alternate front panel power LED header. Pins 1 and 3 of this header duplicate the signals on pins 2 and 4 of the front panel header. If your chassis has a three-pin power LED cable, connect it to this header. -
Page 53: Connecting To The Audio System
Installing and Replacing Desktop Board Components Connecting to the Audio System ® After installing the RealTek audio driver from the Intel Express Installer DVD-ROM, the multi-channel audio feature can be enabled. Figure 24 shows the back panel audio connectors. The default connector assignments are shown in the table. -
Page 54: Connecting Chassis Fan And Power Supply Cables
Intel Desktop Board DX58SO2 Product Guide Connecting Chassis Fan and Power Supply Cables Connecting Chassis Fan Cables Connect chassis fan cables to the chassis fan headers on the Desktop Board. Figure 25 shows the location of the chassis fan headers. -
Page 55: Connecting Power Supply Cables
Installing and Replacing Desktop Board Components Connecting Power Supply Cables Figure 26 shows the location of the power connectors. CAUTION Failure to use an appropriate power supply and/or not connecting the 12 V (Figure 26, A) power connector to the Desktop Board may result in damage to the board or the system may not function properly. -
Page 56: Setting The Bios Configuration Jumper
Intel Desktop Board DX58SO2 Product Guide Setting the BIOS Configuration Jumper NOTE Always turn off the power to the computer before moving the jumper. Moving the jumper with the power on may result in unreliable computer operation. Figure 27 shows the location of the Desktop Board’s BIOS configuration jumper block. -
Page 57: Clearing Passwords
Installing and Replacing Desktop Board Components Table 14. Jumper Settings for the BIOS Setup Program Modes Jumper Setting Mode Description Normal (default) (1-2) The BIOS uses the current configuration and passwords for booting. Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. -
Page 58: Replacing The Battery
Intel Desktop Board DX58SO2 Product Guide 12. To restore normal operation, place the jumper on pins 1-2 as shown below. 13. Replace the cover, plug in the computer, and turn on the computer. Replacing the Battery A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. - Page 59 Installing and Replacing Desktop Board Components VARO Räjähdysvaara, jos pariston tyyppi on väärä. Paristot on kierrätettävä, jos se on mahdollista. Käytetyt paristot on hävitettävä paikallisten ympäristömääräysten mukaisesti. VORSICHT Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden.
- Page 60 Intel Desktop Board DX58SO2 Product Guide Προσοχή Υπάρχει κίνδυνος για έκρηξη σε περίπτωση που η μπαταρία αντικατασταθεί από μία λανθασμένου τύπου. Οι μπαταρίες θα πρέπει να ανακυκλώνονται όταν κάτι τέτοιο είναι δυνατό. Η απόρριψη των χρησιμοποιημένων μπαταριών πρέπει να γίνεται σύμφωνα με...
- Page 61 Installing and Replacing Desktop Board Components POZOR Zamenjava baterije z baterijo drugačnega tipa lahko povzroči eksplozijo. Če je mogoče, baterije reciklirajte. Rabljene baterije zavrzite v skladu z lokalnimi okoljevarstvenimi predpisi. UYARI Yanlış türde pil takıldığında patlama riski vardır. Piller mümkün olduğunda geri dönüştürülmelidir.
- Page 62 Intel Desktop Board DX58SO2 Product Guide To replace the battery, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 31). 2. Turn off all peripheral devices connected to the computer. Disconnect the computer’s power cord from the AC power source (wall outlet or power adapter).
-
Page 63: Installing The Wifi/Bluetooth* Module In A Desktop Chassis
The WiFi/Bluetooth*module is supplemental hardware that is included with certain Desktop Boards. Additional WiFi/Bluetooth modules can be ordered online from http://click.intel.com/Desktop_system_parts-0-C97.aspx. Installing the WiFi/Bluetooth module that is shipped with Intel Desktop Board DX58SO2 in your desktop system allows you to connect to wireless networks and Bluetooth peripherals. -
Page 64: Installing The Wifi/Bluetooth Module
Intel Desktop Board DX58SO2 Product Guide Figure 29. Installing the WiFi/Bluetooth Module... -
Page 65: Updating The Bios
Power-On Self-Test (POST) memory test begins and before the operating system boot begins. This chapter tells you how to update the BIOS by either using the Intel Express BIOS Update utility or the Iflash Memory Update utility, and how to recover the BIOS if an update fails. -
Page 66: Updating The Bios Using The F7 Function Key
Memory Update Utility or the ISO Image BIOS Update File ® You can use the information in this section to update the BIOS using either the Intel Flash Memory Update Utility or the ISO Image BIOS update file. Obtaining the BIOS Update File You can update to a new version of the BIOS by using the ISO Image BIOS update file (recommended), or Intel Flash Memory BIOS update file. -
Page 67: Updating The Bios With The Intel Flash Memory Update Utility
Updating the BIOS with the Intel Flash Memory Update Utility With the Intel Flash Memory Update Utility you can update the system BIOS from a bootable CD-ROM, bootable USB flash drive, or other bootable USB media. The utility available on the Intel World Wide Web site provides a simple method for creating a bootable CD-ROM that will automatically update your BIOS. -
Page 68: Recovering The Bios
CD-R with the .BIO file in the root directory will be required. You can obtain the Recovery BIOS Update file through your computer supplier or by navigating to the Intel Desktop Board DX58SO2 page on the Intel World Wide Web site Download Center at http://downloadcenter.intel.com. -
Page 69: Configuring For Raid
4. Then save your settings by pressing <F10>. Creating Your RAID Set 1. Upon re-boot, you will see the following Intel Matrix Storage Manager option ROM status message on the screen: Press <Ctrl-I> to enter the RAID Configuration Utility. Press <Ctrl-I> and enter the RAID Configuration Utility. -
Page 70: Loading The Intel Matrix Storage Technology Raid Drivers And Software
ICH10R SATA RAID Controller driver. 3. Finish the Windows installation and install all necessary drivers. 4. Install the Intel Matrix Storage Console software via the Intel Express Installer CD included with your Desktop Board or after downloading it from the Internet at http://www.intel.com/p/en_US/support?iid=hdr+support. -
Page 71: Configuring For External Raid Using Marvell* Storage Technology
Configuring for RAID Configuring for External RAID Using Marvell* Storage Technology Configuring the BIOS 1. Assemble your system and attach two External SATA hard drives to the Desktop Board’s two back panel eSATA connectors. 2. Enter system BIOS Setup by pressing the <F2> key after the Power-On-Self-Test (POST) memory tests begin. - Page 72 Intel Desktop Board DX58SO2 Product Guide...
-
Page 73: A Error Messages And Indicators
A Error Messages and Indicators Intel Desktop Board DX58SO2 reports POST errors in three ways: • By sounding a beep code and blinking the front panel power LED • By displaying an error message on the monitor • By displaying diagnostic progress codes (POST codes) BIOS Error Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s... -
Page 74: Bios Error Messages
Intel Desktop Board DX58SO2 Product Guide BIOS Error Messages When a recoverable error occurs during the POST, the BIOS displays an error message describing the problem. Table 17 gives an explanation of the BIOS error messages. Table 17. BIOS Error Messages... -
Page 75: Port 80H Post Codes
Error Messages and Indicators Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h and displayed on the Desktop Board’s seven-segment LED display shown in Figure 30. -
Page 76: Port 80H Post Codes
Intel Desktop Board DX58SO2 Product Guide Table 18 lists the Port 80h POST codes in hexadecimal notation. Table 18. Port 80h POST Codes POST Code Description ACPI S States Entering S0 state, standard 01-05 Entering S1-S5 state 10, 20, 30,... - Page 77 Error Messages and Indicators POST Code Description CPU Initialization (PEI, DXE, SMM) 41-43 Begin to end CPU PEI init 44-46 Begin to end CPU SMM init/relocate bases 47-4C CPU DXE phase begin to end 4D-4F CPU DXE SMM phase begin to end I/O Buses 50-52 PCI enumeration, allocation, hot plug...
- Page 78 Intel Desktop Board DX58SO2 Product Guide...
-
Page 79: B Regulatory Compliance
Product Ecology statements • Electromagnetic Compatibility (EMC) regulations • Product certifications Safety Standards Intel Desktop Board DX58SO2 complies with the safety standards stated in Table 19 when correctly installed in a compatible host system. Table 19. Safety Standards Regulation Title CSA/UL 60950-1 Information Technology Equipment –... -
Page 80: European Union Declaration Of Conformity Statement
Intel Desktop Board DX58SO2 Product Guide European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel ® Desktop Board DX58SO2 is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directives 2004/108/EC (EMC Directive), 2006/95/EC (Low Voltage Directive), and 2002/95/EC (ROHS Directive). -
Page 81: Product Ecology Statements
The following information is provided to address worldwide product ecology concerns and regulations. Recycling Considerations As part of its commitment to environmental responsibility, Intel has implemented the ® Intel Product Recycling Program to allow retail consumers of Intel’s branded products to return used products to selected locations for proper recycling. - Page 82 Français Dans le cadre de son engagement pour la protection de l'environnement, Intel a mis en œuvre le programme Intel Product Recycling Program (Programme de recyclage des produits Intel) pour permettre aux consommateurs de produits Intel de recycler les produits usés en les retournant à...
- Page 83 Regulatory Compliance Portuguese Como parte deste compromisso com o respeito ao ambiente, a Intel implementou o Programa de Reciclagem de Produtos para que os consumidores finais possam enviar produtos Intel usados para locais selecionados, onde esses produtos são reciclados de maneira adequada.
-
Page 84: China Rohs
The China Ministry of Information Industry (MII) stipulates that a material Self Declaration Table (SDT) must be included in a product’s user documentation. The SDT for Intel Desktop Board DX58SO2 is shown in Figure 31. Figure 31. Intel Desktop Board DX58SO2 China RoHS Material... -
Page 85: Emc Regulations
Regulatory Compliance EMC Regulations Intel Desktop Board DX58SO2 complies with the EMC regulations stated in Table 20 when correctly installed in a compatible host system. Table 20. EMC Regulations Regulation Title FCC 47 CFR Part 15, Title 47 of the Code of Federal Regulations, Part 15, Subpart B, Subpart B Radio Frequency Devices. -
Page 86: Canadian Department Of Communications Compliance Statement
• Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the user’s authority to operate the equipment. Tested to comply with FCC standards for home or office use. -
Page 87: Korea Class B Statement
Regulatory Compliance Korea Class B Statement Korea Class B Statement translation: This equipment is for home use, and has acquired electromagnetic conformity registration, so it can be used not only in residential areas, but also other areas. Ensure Electromagnetic Compatibility (EMC) Compliance Before computer integration, make sure that the power supply and other modules or peripherals, as applicable, have passed Class B EMC testing and are marked... -
Page 88: Product Certifications
Intel Desktop Board DX58SO2 Product Guide Product Certifications Board-Level Certifications Intel Desktop Board DX58SO2 has the regulatory compliance marks shown in Table Table 21. Regulatory Compliance Marks Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel Desktop Boards: E210882. -
Page 89: Chassis- And Component-Level Certifications
Compliance The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements. Intel has worked directly with these two governmental agencies in the definition of the new requirements. Intel Desktop Board DX58SO2 meets the following program requirements in an... - Page 90 Intel Desktop Board DX58SO2 Product Guide...