1.11.1.2
Wake-up Devices and Events
Table 11 lists the devices or specific events that can wake the computer from specific
states.
Table 11. Wake-up Devices and Events
Devices/events that wake up the system...
Power switch
RTC alarm
LAN
USB
WAKE#
Consumer IR
Notes:
1.
S4 implies operating system support only.
2.
USB ports must be turned off during S4/S5 states.
3.
When Deep S4/S5 is enabled only Wake from RTC and Power Switch is supported.
NOTE
The use of these wake-up events from an ACPI state requires an operating system that
provides full ACPI support. In addition, software, drivers, and peripherals must fully
support ACPI wake events.
1.11.2
Hardware Support
The board provides several power management hardware features, including:
Wake from Power Button signal
•
•
Instantly Available PC technology
LAN wake capabilities
•
•
Wake from USB
WAKE# signal wake-up support
•
•
Wake from S5
Wake from CIR
•
•
+5 V Standby Power Indicator LED
NOTE
The use of Wake from USB from an ACPI state requires an operating system that
provides full ACPI support.
...from this sleep state
Note 1)
(
S3, S4, S5
(Note 1)
S3, S4, S5
(Note 1)
S3, S4, S5
(Note 2)
S3
(Note 1)
S3, S4, S5
(Note 3)
S3, S4, S5
Product Description
33