Using The Hp Universal Print Driver (Select Models Only) - HP ProBook 4525s - Notebook PC Reference Manual

Select
Intel ME Firmware Local Update
LAN Controller
Intel ME Features Control
Intel ME Power Control
iAMT Configuration
Select
Host Name
TCP/IP
Provision Model
Setup and Configuration
Un-Provision
SOL/IDE-R
Password Policy
Secure Firmware Update
Set PRTC
Idle Timeout
Change Intel ME Password
Select
Change ME Password

Using the HP Universal Print Driver (select models only)

The HP Universal Print Driver Series for Windows is a single intelligent driver that replaces individual
drivers for HP networked printers.
NOTE: The HP Universal Print Driver is preinstalled on select computer models only. To download
the HP Universal Print Driver or obtain more information about using it, see the HP Web site at
http://www.hp.com/go/universalprintdriver
To do this
Disable/enable local management of firmware updates.
Disable/enable the integrated network controller.
Disable/enable AMT or none.
Configure the management engine power policies.
To do this
Assign a host name to the computer.
Disable/enable network interface or DHCP (assigns an IP
address if DHCP has been disabled) or change the domain
name.
Assign Enterprise or Small Business iAMT model.
Set options to control remote configuration of AMT.
Reset the AMT configuration to factory defaults.
Disable/enable remote boot control to IDE diskette or CD-ROM
and assign a user name and password.
Set options to control requirements for the network password
and the MEBx password.
Disable/enable or disable updating firmware remotely.
Set the real-time clock.
Set a time-out value.
To do this
Change the password.
NOTE: The default password is admin.
(English only).
Using the HP Universal Print Driver (select models only) 77