Entering A Drivelock Password; Changing A Drivelock Password; Removing Drivelock Protection - HP ProBook 4436s Reference Manual
Hp notebook reference guide - windows 7
Hide thumbs
Also See for ProBook 4436s:
- Maintenance and service manual (138 pages) ,
- User manual (108 pages) ,
- Getting started (70 pages)
Table of Contents
Advertisement
Entering a DriveLock password
Be sure that the hard drive is inserted into the computer (not into an optional docking device or
external MultiBay).
At the DriveLock Password prompt, type your user or master password (using the same kind of
keys you used to set the password), and then press enter.
After 2 incorrect attempts to enter the password, you must shut down the computer and try again.
Changing a DriveLock password
To change a DriveLock password in Computer Setup, follow these steps:
1.
Turn on the computer, and then press
message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select Security > DriveLock Password, and then
press enter.
4.
Use a pointing device to select an internal hard drive.
– or –
Use the arrow keys to select an internal hard drive, and then press enter.
5.
Use a pointing device or the arrow keys to select the password you want to change.
6.
When prompted, type your current password, and then press enter.
7.
When prompted, type a new password, and then press enter.
8.
When prompted, type the new password again to confirm, and then press enter.
9.
To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
Removing DriveLock protection
To remove DriveLock protection in Computer Setup, follow these steps:
1.
Turn on the computer, and then press
message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select Security > DriveLock Password, and then
press enter.
4.
Use a pointing device or the arrow keys to select an internal hard drive, and then press enter.
5.
Use a pointing device or the arrow keys to select Disable protection.
58
Chapter 7 Security
f10
to enter Computer Setup.
f10
to enter Computer Setup.
esc
while the "Press the ESC key for Startup Menu"
esc
while the "Press the ESC key for Startup Menu"
Hide quick links:
Advertisement
Table of Contents
