Checking the status of supplies
A message appears on the display when a replacement supply item is needed or when maintenance is required.
Checking the status of supplies from the printer control panel
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press the up or down arrow button until Status/Supplies appears, and then
press
.
3
Press the up or down arrow button until View supplies appears, and then press
The status of each supply appears.
Checking the status of supplies from a network computer
Note: The computer must be connected to the same network as the printer.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in the
TCP/IP section.
2
Click Device Status. The Device Status page appears, displaying a summary of supply levels.
Ordering supplies
To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies
dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the
place where you purchased the printer.
Note: All life estimates for printer supplies assume printing on letter- or A4-size plain paper.
Part numbers
Part name
Toner Cartridge
Photoconductor Kit
Maintenance kit (low voltage)
Maintenance kit (high voltage)
Maintenance kit (100 volt)
Staple Cartridge
Ordering a toner cartridge
When 88 Cartridge low appears, order a new cartridge.
Part number
W850H21G
W850H22G
40X0956
40X0957
40X0958
25A0013
Maintaining the printer
4
.
For printer
W850
W850
W850
W850
W850
W850