Inner Link And Outer Link Assembly Removal - Lexmark T430 Service Manual

4048-1xx

Inner link and outer link assembly removal

Note: Links are shown in light color for visibility. They are actually
dark in color.
1. Remove the controller card cage. See
(with card in place) removal" on page
2. Remove the fuser. See
page 4-26.
3. Remove the charge roll. See
page 4-38.
4. Remove the remaining screws fastening the top cover and tilt
the cover forward onto the front cover.
5. Remove the screw behind the card cage which holds the outer
link assembly and the inner link together.
6. Remove the screw behind the card cage, which fastens the link
guide to the left guide assembly.
4-78
Service Manual
"Controller card cage
"Fuser assembly removal" on
"Charge roll removal" on
4-48.