Lexmark T430 Service Manual page 93

Problem
The media skews or
buckles.
The paper sticks
together/printer feeds
multiple sheets of paper.
The paper fails to feed
from tray 1 or tray 2.
The paper fails to feed
from the optional tray 2
or tray 3.
Action
• Don't overfill tray 1 or the optional tray 2 (see
media capacities in the media types and
sizes table in the User's Reference).
• Make sure the paper guides are flush
against the edges of the media.
• Remove the paper from tray 1 or the
optional tray 2 and fan the paper.
• Don't overfill tray 1 or the optional tray 2 (see
media capacities in the media types and
sizes chart in the User's Reference).
• Remove the paper from tray 1 and fan the
paper.
• Make sure tray 1 is selected from the printer
driver.
• Do not overfill the tray.
• Make sure the printer recognizes the
optional trays. POR the printer and check
the cables.
• Make sure the optional tray 2 is selected
from the printer driver.
• Remove the paper from the optional tray 2
and fan the paper.
• Make sure the tray is pushed all the way in.
• Make sure the metal plate is pressed down
before inserting the tray into the printer.
Note: Once the tray is inserted, the metal
plate springs up so the paper can feed into
the printer.
• Make sure the paper does not exceed the
stack height indicator.
• Make sure the paper is under both corner
bucklers (see loading paper in the User's
Reference).
Diagnostic information
4048-1xx
2-59