Patch And Fix Events; Vpm Patch And Fix Events - HP Xw460c - ProLiant - Blade Workstation User Manual

Event
Started VPM Scan
Started VPM Scan for System
Completed VPM Scan
Completed VPM Scan for System
Failed VPM Scan

Patch and fix events

The following table lists the events created by the Vulnerability and Patch Management patching components.
Table B-6 VPM patch and fix events
Event
Submitted VPM Patch and Fix
Started VPM Patch and Fix
Started VPM Patch and Fix for System
Completed VPM Patch and Fix
VPM Patch Start
Completed VPM Patch and Fix for System
VPM Patch Ended with Success
VPM Patch Ended with Failure
VPM Patch Current Status
VPM Patch Not Applicable
174 HP Vulnerability and Patch Management infrastructure requirements and additional VPM functionality
Description
A group vulnerability scan has started
A vulnerability scan has started on a system
A group vulnerability scan has completed
A vulnerability scan has completed on a
system
A failure has occurred during a VPM scan
Description
A VPM patch and fix has been submitted.
A group VPM patch and fix has started.
A VPM patch and fix has started on a
system.
A group VPM patch and fix has completed.
A vulnerability patch installation has begun
on the target system
A VPM patch and fix has completed on a
system.
A vulnerability patch installation has ended
on the target system with the status of
successful.
A vulnerability patch installation has ended
on the target system with the status of
failure.
VPM Patch Agent is reporting the current
status of a patch on the target device.
The selected patch is not applicable to the
selected system and therefore is not
applied.
Occurs
When a scan is started for all systems
selected in the scan operation. Each
individual system also has a scan start event.
Individual machines are scanned one at a
time.
At the start of the scan for each individual
system.
When a scan is completed for all systems
selected in the scan operation. Each
individual system also has a scan completion
event. Individual machines are scanned one
at a time.
At the completion of the scan for each
individual system.
When an entire scan fails to complete
because of an internal error. Check the
system event log for more information.
Occurs
When one or more patches and fixes have
been submitted.
When one or more patches or fixes have
been started for all systems selected in the
patch-fix operation. Each individual system
also has a start event.
When one or more patches or fixes have
been started for an individual system.
When all patches and fixes have been
completed for all systems selected in the
patch-fix operation. Each individual system
also has a completion event.
When a vulnerability patch installation has
been started on the target system. A software
update or bulletin is being applied to the
target system.
When all patches and fixes have been
completed for an individual system.
When a vulnerability patch installation has
ended on the target system with the status
of successful.
When a vulnerability patch installation has
ended on the target system with the status
of failure. Follow up might be required to
determine the actual cause and remedy to
the failure. It might be useful to examine any
patch event details related to this patch.
The status is reported after the reboot. When
VPM Patch Agent reports the current status
of a patch on the target device because of
a patch requiring a reboot.
When the selected patch is not applicable
to the selected system.