Sample Pmp Static Analysis Report; Sample Pmp Server Availability Report; Viewing Patch Installation Status - HP Xw460c - ProLiant - Blade Workstation User Manual

Sample PMP Static Analysis report

A Static Analysis report is an analysis of the hardware configuration for the server as a whole, identifying
potential problem areas. A complete list of the configuration information analyzed to report the status of
server subsystems is provided in the

Sample PMP Server Availability report

Server Availability report is created in a browser window in a printable format. The report has one section,
consisting of a table showing what percentage of time each server was in a bottleneck state during the
selected interval, Accessible Duration of Server in hours, Inaccessible Duration of Server in hours, and
Average of each Metrics for selected servers.

Viewing patch installation status

You can view consolidated reports displaying patch installation status of all systems managed by the
Vulnerability and Patch Management. The VPM Patch Agent updates the patch database with a list of all
applicable patches, including patches installed by methods other than the Vulnerability and Patch
Management. Patch reports display the installation status of these patches for each system. The recommended
method for determining required patches is performing a vulnerability scan.
You can view reports by systems or patches. A search filter is available to view the status of a particular
patch on a particular system.
Patch reports display information obtained from the most recent patch deployment or validation task and,
therefore, might not be current. You can update the patch installation status by validating installed patches.
For more information, see
PMP measurement categories
Validating installed patches.
section of this guide.
Sample PMP Static Analysis report 135