Displaying The Zone Configuration Summary; Viewing A Zone Configuration Summary Report; Creating A Configuration Analysis Report; To Create A Configuration Analysis Report - HP StorageWorks 2/64 - Core Switch Administrator's Manual

Displaying the zone configuration summary

The zone configuration summary hierarchically lists all defined zoning elements known to the current Zone
Admin session, whether any of the listed configurations has been enabled, and whether any of the lower
level elements has been added as members of the higher level (aliases, zones, QuickLoops, FA zones)
structures. The zone configuration summary displays the entire contents of the fabric zoning database as it
was at the time the Zone Admin session was launched, or the most recently saved or refreshed
information, and any unsaved changes you make since the time the Zone Admin session is launched. It
provides the name of the zone configuration that was enabled at the time you launched the Zone Admin
session; however, keep in mind that the enabled configuration might have changed since then and that
this screen does not reflect those changes.

Viewing a zone configuration summary report

1. Launch the Zone Admin module as described on
2. Select File > Print Summary.
The Zone Configuration summary window is displayed, as shown in
It is important to note that the summary displays the information based on the changes just made. If
current Zone Admin session changes have not yet been saved to the fabric, the information displayed
here is different from what is seen from the switch.
3. Optional: Click Print to print the zone configuration summary.
The print dialog box opens.
Figure 30

Zone Configuration summary

Creating a configuration analysis report

The configuration analysis report lists the following:
• SAN components (ports, WWNs, and AL_PAs) that are not included in the configuration
• SAN components (ports, WWNs, and AL_PAs) that are contained in the configuration but not in the
fabric

To create a configuration analysis report

1. Launch the Zone Admin module as described on
2. Select the Config tab.
96 Administering zoning
page 83.
Figure
page 83.
30.