Remove An Internal Sata Drive - HP X510 - StorageWorks Data Vault User Manual

8. Flex the right side rail, and then insert the pins into the hard drive's mounting holes.
9. With the handle up, slide the hard drive tray and drive into the expansion bay.
10. Press down on the handle on the hard drive tray until it locks.
11. Close the door on the front of the server.
11. Notice that within a few seconds the light bar for the new hard drive blinks aqua white
This indicates that the hard drive has been installed, but has not been initialized.
12. Add the drive to the server's total

Remove an Internal SATA Drive

For information about removing the
storage.
system drive, see Replace the System
Server Storage
Drive.
221