Network Connection Light Is Off - HP X510 - StorageWorks Data Vault User Manual

HP Data Vault User's Guide
Code
Solid red—no code
1 aqua white, 2 red
1 aqua white, 3 red
1 aqua white, 4 red
1 aqua white, 5 red
1 aqua white, 6 red
Code
2 aqua white, 1 red
2 aqua white, 2 red
2 aqua white, 3 red
N
ETWORK
To determine why the network connection light is off:
•
Make sure that all the cable connections are correctly plugged in.
Make sure the router
•
Restart the router or switch (or unplug and plug it back in).
262
Health indicator codes when the indicator starts as solid red
Description
Operating system or application
error.
System drive failed to boot.
Operating system USB boot
failed.
Recovery mode failed.
Multiple boot failure.
Service code.
Codes when the indicator starts as blinking red
Description
BIOS corrupted.
Memory failure.
BIOS recovery source not
present.
C
ONNECTION
or switch has power.
See Windows Home Server
Console for error condition.
If the light-bar for the system
drive (the lowest light-bar) is
also red, you need to
system hard
Check that lowest USB port on
back of server has boot source.
Contact HP Support at
http://www.hp.com/support.
Contact HP Support at
http://www.hp.com/support.
Do not hold state button longer
that 3 seconds. Shut down and
repeat.
Repeat power-on to validate. If
repeats Contact HP Support at
http://www.hp.com/support.
Contact HP Support at
http://www.hp.com/support.
Contact HP Support at
http://www.hp.com/support.
L O
IGHT IS FF
Action
replace the
drive.
Action