Table of Contents
Advertisement
Memory module
Description
1024 MB (PC2-6400, 800-MHz, DDR2)
2048 MB (PC2-6400, 800-MHz, DDR2)
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the memory module:
1.
Position the computer with the front toward you.
2.
Loosen the Phillips PM2.5×7.0 captive screw (1) that secures the memory module compartment
cover to the computer.
3.
Lift the right side of the cover (2), swing it to the left, and lift the cover off the computer (3). The
memory module compartment cover is included in the Plastics Kit, spare part number
486862-001.
4.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
42
Chapter 4 Removal and replacement procedures
Battery on page
34).
Spare part number
532331-003
532332-003
Advertisement
Table of Contents
