Table of Contents
Advertisement
Microphone module
Description
Microphone module and cable
Before removing the microphone module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Optical drive (see
b.
Keyboard (see
c.
Keyboard cover (see
d.
Speaker assembly (see
e.
Display assembly (see
Remove the microphone module:
1.
Release the tabs (1) built into the display enclosure.
2.
Release the microphone receiver (2) from the display enclosure. The microphone receiver is
secured by two-sided tape.
3.
Remove the microphone cable (3) and receiver from the display enclosure.
Reverse this procedure to install the microphone module.
58
Chapter 4 Removal and replacement procedures
Battery on page
34).
Optical drive on page
Keyboard on page
44)
Keyboard cover on page
Speaker assembly on page
Display assembly on page
35)
46)
49)
51)
Spare part number
517629-001
Advertisement
Table of Contents
