Table of Contents
Advertisement
20.
Remove the wireless antenna transceivers and cables (4) from the display enclosure. The wireless
antenna transceivers and cables are included in the Wireless Antenna Kit, spare part number
489066-001.
Reverse this procedure to reassemble and install the display assembly.
Camera/microphone module
If it has been determined that the camera/microphone module is the component that must be replaced
to complete the computer repair, the display assembly does not have to be removed. Follow the
procedures in this section to replace the camera module. For information on replacing the display
assembly and other display assembly internal components, see
Description
Camera/microphone module
Before removing the camera/microphone module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the camera/microphone module:
1.
Turn the computer display-side up, with the front toward you.
2.
Open the computer as far as it will open.
3.
Flex the inside edges of the left and right sides, and then pull outward on the middle of the top
edge (1) of the display bezel until the top middle of the bezel disengages from the display enclosure.
Battery on page
43).
Display assembly on page
Spare part number
486734-001
Component replacement procedures
62.
67
- Quick Links:
- Memory Module
Hide quick links:
Advertisement
Table of Contents
