Attaching The Computer To A Mounting Fixture; Synchronizing The Optional Wireless Keyboard Or Mouse - HP TouchSmart 9300 Hardware Reference Manual

wire cable attached. You attach one end of the cable to your desk (or other stationary object) and the
other end of the cable to the security slot on the computer. Secure the security lock with the key.
Figure 2-32

Attaching the Computer to a Mounting Fixture

You can remove the computer from the stand and install it on a wall, monitor arm, or other mounting
fixture. There is a VESA adapter plate attached to the underside of the computer stand that is used
for mounting the computer.
Table 2-2 Mounting Specifications
Computer Dimensions (without stand)
Height
Width
Depth
Computer Weight (without stand, with VESA adapter plate)
Integrated Graphics
Discrete Graphics
VESA standard adapter plate hole patterns (height x width)
For instructions on mounting the computer, refer to the Wall-Mounting your HP TouchSmart User
Guide.

Synchronizing the Optional Wireless Keyboard or Mouse

The optional wireless keyboard and mouse are easy to set up. Just remove the battery tabs on both
the keyboard and the mouse. Also, make sure the Power switch on the bottom of the mouse is in the
ENWW
Installing a Security Lock
405.2 mm
584.5 mm
86 mm
8.75 kg
9.05 kg
100 mm x 100 mm
100 mm x 200 mm
Attaching the Computer to a Mounting Fixture
15.953 inches
23.012 inches
3.78 inches
19.29 lbs
19.95 lbs
3.937 in x 3.937 in
3.937 in x 7.874 in
29