Connecting Power
1.
Squeeze the two tabs on the rear port access door at the back of the computer (1) and pull the
door open (2).
Figure 2-1
2.
Reach into the rear cavity framed by the computer stand and plug the power cord into the power
connection at the top right corner (1).
3.
Plug the three-pronged power plug into the power brick (2) and a power outlet (3).
Figure 2-2
4.
Plug all peripheral cables into the appropriate ports as needed.
10
Chapter 2 Hardware Upgrades
Opening the Rear Port Access Door
Connecting Power
ENWW