Where To Obtain Installation Instructions; Bus Segments On The Hp Ultra3 Scsi Host Adapter - HP Tc2110 - Server - 128 MB RAM Installation And Configuration Manual

Chapter 1
Although the HP Ultra3 SCSI Host Bus Adapter is a 64-bit PCI host bus adapter, it
also works in a 32-bit PCI slot. When installed in a 32-bit PCI slot, the host bus
adapter automatically runs in the slower 32-bit mode. This installation guide
explains how to:
·
Install the HP Ultra3 SCSI host bus adapter
·
Set up SCSI devices
·
Connect SCSI devices

Where to Obtain Installation Instructions

Complete installation and removal instructions can be found in both of the following
sources:
·
The HP Server Operations and Maintenance Guide, on the HP Server Online
Documentation CD-ROM shipped with your HP Server, has a complete chapter
on installing and configuring the HP Server.
·
The HP Server Operations and Maintenance Guide for your HP Server can be
viewed and printed from the official HP Server web site:
http://www.hp.com
Bus Segments on the HP Ultra3 SCSI Host
Adapter
The HP Ultra3 SCSI host bus adapter features technology that ensures you get the
best performance from your Ultra3 and Ultra2 SCSI devices by electronically
isolating the primary LVD/SE segment from the secondary SE segment on the SCSI
bus. This allows the HP Ultra3 SCSI host bus adapter to support newer Ultra3 and
Ultra2 SCSI devices at speeds up to 160 MBytes/sec on the primary LVD/SE
segment while at the same time supporting Ultra (legacy) devices at speeds up to 40
MBytes/sec on the secondary SE segment. The following figure shows the two SCSI
segments.
2
Installation and Setup