Configuration With Scsiselect - HP Tc2110 - Server - 128 MB RAM Installation And Configuration Manual

2 Configuration with SCSISelect

SCSISelect, included with the HP Ultra3 SCSI Host Bus Adapter, enables you to
change SCSI settings without opening the computer or handling the host bus adapter.
SCSISelect also enables you to low-level format or verify the disk media of your
SCSI hard disk drives. The following table lists the available and default settings for
each SCSISelect option.
NOTE
Table 2-1. SCSI Select Options
SCSISelect Options
SCSI Bus Interface Definitions:
Host Adapter SCSI ID
SCSI Parity Checking
Host Adapter SCSI Termination
LVD/SE Connectors
SE Connectors
Boot Device Options:
Boot SCSI ID
Boot LUN Number
SCSI Device Configuration:
Sync Transfer Rate (MBytes/sec) 160, 80.0, 53.4, 40.0,
The default settings are appropriate for most systems. Run
SCSISelect if you need to change or view current settings, or
if you would like to run the SCSI disk utilities.
1
Available Settings
0-15
Enabled, Disabled
Automatic, Enabled,
Disabled
Automatic
Low ON/High ON
Low OFF/High OFF
Low OFF/High ON
0-15
0-7
32.0, 26.8, 20.0,
16.0, 13.4, 10.0,
ASYN
Default
Setting
7
Enabled
Automatic
Automatic
0
0
160
11