HP Tc2110 - Server - 128 MB RAM Installation And Configuration Manual page 46

Chapter 4
[xxxxx089] Unable to allocate memory
This indicates that there may be a problem with the amount of memory installed in
your system. Verify that your system has at least the minimum amount of memory
required by your operating system.
[xxxxx096] Adapter hardware initialization failure—possible resource
conflict
The driver has attempted to initialize the adapter hardware but failed. This might
suggest that an adapter resource (for example, an IRQ) conflicts with another board
installed in your system.
[xxxxx097] Unable to allocate memory
This indicates that there may be a problem with the amount of memory installed in
your system. Verify that your system has at least the minimum amount of memory
required by your operating system.
[xxxxx0af] Unable to de-allocate memory that was allocated for a target
device
Normally, this is not a serious problem, unless you get this message frequently over
a short period of time. The memory can be reclaimed by rebooting the system.
[xxxxx0ce] Scatter/gather limit exceeded
An I/O request packet from the system contained a Scatter/Gather element list that
contained more elements than are supported by the miniport. Scatter/Gather is a list
of data segments that define the entire data transfer. Scatter/Gather is a means to
improve total data throughput. This error might be caused by a component external
to the miniport driver, such as the operating system or an ASPI application.
[xxxxxd4] Adapter hardware failure - adapter reset
The host adapter hardware failed and the miniport driver has to reset the hardware.
[xxxxx0d6] Internal driver error
An error has occurred while the driver was setting up its internal data structures. Try
installing the most up-to-date version of the driver available from the HP Web site
at:
http://www.hp.com
40
Microsoft Windows 2000 Installation