Section 3. Perform Netware 5.1 Or Novell Small Business Suite 5.1 Installation36; Phase 1 - Start The Installation - HP Tc2100 - Server - 128 MB RAM Installation Manual

Chapter 4
2. Insert your HP Startup CD in a Windows PC and follow the on-screen
instructions to create the HP Server tc2100 NetWare SCSI and LAN drivers
(HP disk NW).
NOTE If the Windows PC does not auto-start the Startup menu, start it
by opening Startup.htm found at the root level of the
Startup CD.
Section 3. Perform NetWare 5.1 or Novell Small
Business Suite 5.1 Installation
The installation of NetWare 5.1 or Novell Small Business Suite 5.1 contains
several phases:
• Phase 1 – Start the Installation
• Phase 2 – Install HP Drivers
• Phase 2 – Configure the Network
PHASE 1 – Start the Installation
NOTE If your hard drive contains data or is not new, HP recommends
to use a utility such as fdisk to erase all data and partitions
from your hard drive.
1. Insert the Novell NetWare 5.1 or Novell Small Business Suite 5.1CD-ROM
and boot the system.
For NetWare 5.1
2. Press Enter to read the license agreement then press Esc, and select
"Accept License Agreement".
3. Press Enter to "Create a New Boot Partition".
4. HP recommends accepting the default 100MB boot partition by pressing
Enter to continue.
5. If you accept erasing all data on your disk, select Continue. Your system
will now create the partition, reboot, and format that partition.
36
Installing Novell NetWare 5.1 and Novell Small Business Suite 5.1