Section 2. Configure The Network; Phase 1 - Configure Server Ip Address - HP Tc2100 - Server - 128 MB RAM Installation Manual

Chapter 3 Installing Microsoft Windows 2000 Server and Small Business Server 2000
Install the Client Utility on a Client Workstation
1. Insert diskette 1 in the target client and run
A:\setup.exe
2. Click Continue at the setup screen.
3. Complete the "Name and Organization Information" form. You will be
prompted for this information only the first time the diskettes are used. Click
OK to validate then OK again to confirm.
4. Click I Agree to accept the license agreement.
5. Click the Large Icon to start installation.
6. Select the installation mode you feel appropriate: all users (Yes) or current
user only (No).
7. Insert following diskette(s) when prompted and follow screen instructions.
8. Click OK when the installation is completed then shutdown and restart
workstation.

Section 2. Configure the network

PHASE 1 - Configure Server IP Address

During the installation process the system was configured to use DHCP. If no
DHCP server is found on the network the system will auto-configure a random IP
address to start functioning. It is important that you configure the proper IP
address to be able to communicate with the clients:
1. Right click My Network Places | Properties | Local Area Connection on
your HP server.
NOTE
2. Click Internet Protocol(TCP/IP) | Properties | Use the following IP
address.
3. Enter appropriate IP address.
If you HP server host several Network adapters, the window
will show one "Local Area Connection" icon for each
Network adapter present in the system. Identify the proper
adapter by browsing each one.
23