Epson SureLab D3000 - Single Roll Operation Manual page 83

Item
Ink Level
Trimmed Waste Paper Box
Usage
Clear Usage
Maintenance Tank Space
Settings/Maintenance
Help
Close
Note:
This product has been adjusted based on genuine ink cartridges. If you use non-genuine cartridges, the print results
may be faint or the amount of ink remaining may not be detected correctly. We recommend using genuine ink
cartridges.
Tip:
Only the Dual Roll Model supports front roll paper. For the Single Roll Model, information is not displayed under
the front paper item. See the information for rear roll paper.
Setup and Maintenance
Displays the remaining amount of ink.
"Caution" is displayed when ink is running low. "Error" is displayed when the amount of
ink remaining has fallen below the minimum limit. The ink cartridge is grayed out when
the ink cartridge is not installed, or if there is a problem with the ink cartridge.
If a non-genuine cartridge is installed, a message is displayed indicating that it is not
covered by the warranty.
Displays the usage status of the trimmed waste paper box.
"-" is displayed when information cannot be acquired from the printer.
Click to clear the trimmed waste paper box usage.
When you remove the trimmed waste paper from the trimmed waste paper box, click
Clear Usage to reset the usage.
Displays the amount of free space in the maintenance tank as a bar.
When information cannot be acquired from the printer, the bar is not displayed.
Click to open the Settings/Maintenance screen.
U "Paper Settings" on page 84
U "Auto Cleaning" on page 86
U "Nozzle Check" on page 89
U "Operation History" on page 95
Click to display the Help.
Closes the Printer Information screen.
83
Explanation