Epson SureLab D3000 - Single Roll Operation Manual page 115

Document
Hide thumbs Also See for SureLab D3000 - Single Roll:
Table of Contents

Advertisement

Error ID
2016
The top cover has been opened.
There may still be paper inside the printer.
Remove paper inside the printer, close the cover, and then click
[OK].
2017
The back printing unit has not been installed in the correct
position.
There may still be paper inside the printer.
Remove paper inside the printer, set the back printing unit to
the correct position, and then click [OK].
2018
The long paper ejection unit has been opened.
There may still be paper inside the printer.
Remove paper inside the printer, close the cover, and then click
[OK].
2110
The front sorter tray is full.
Remove the prints from the sorter tray, and then click [OK].
2192
The cleaning sheet is loaded with the wrong side up.
Load the cleaning sheet front-side up, and then click [OK].
2251
The trimmed waste paper box is full.
Empty the trimmed waste paper box.
After emptying the trimmed waste paper box, click [Reset] to
reset the trimmed waste paper box usage.
2301 to 2304
Ink cartridge error. (xx)
2306 to 2307
If the ink cartridge is not set correctly, set it correctly.
Please install correct cartridge.
2321 to 2324
2333 to 2334
2311 to 2314
Replace ink cartridge: XX, and then click [OK].
2316 to 2317
Epson recommends the genuine Epson cartridge.
2327 to 2330
Insufficient ink left to perform initial charge: (xx)
2335 to 2336
Replace ink cartridge, and then click [OK].
Troubleshooting
Message
115
What to do
Remove paper inside the printer, close
the top cover. If an error is displayed
on the Client PC, click OK.
U "When the Paper Jams" on page
120
Remove paper inside the printer, set
the back printing unit to the correct
position, and then click OK.
U "When the Paper Jams" on page
120
Remove paper inside the printer, close
the long paper ejection unit cover. If
an error is displayed on the Client PC,
click OK.
U "When the Paper Jams" on page
120
Remove paper from the sorter tray.
If an error is displayed on the Client
PC, click OK.
When the error does not clear even
after removing the paper, hold down
the Sorter Drive Switch for 10 seconds
to move the sorter tray to the
appropriate position.
U "Problems with the Sorter" on
page 134
Load the Cleaning Sheet front-side up,
and close the cover. If an error is
displayed on the Client PC, click OK.
Empty the trimmed waste paper box.
After emptying the trimmed waste
paper box, click Reset to reset the
trimmed waste paper box usage.
U "Disposing of Trimmed Waste
Paper" on page 66
Check the ink cartridge for the color
displayed in (xx), replace or reset the
ink cartridge, and close the cover. If an
error is displayed on the Client PC,
click OK.
U "Replacing Ink Cartridges" on
page 57
Replace the ink cartridge for the color
displayed in (xx), and close the cover.
If an error is displayed on the Client
PC, click OK.
U "Replacing Ink Cartridges" on
page 57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-d3000

Table of Contents