Epson SureLab D3000 - Single Roll Operation Manual page 111

Error ID
2105 An error occurred in the paper feeding unit.
Reload the paper.
Click [OK] after loading the paper.
2108 The front roll paper is not loaded correctly.
Check the position of the paper width guide and reload the
paper.
Click [OK] after loading the paper.
2109 The rear roll paper is not loaded correctly.
Check the position of the paper width guide and reload the
paper.
Click [OK] after loading the paper.
2111 The front roll is out of paper.
Remove the paper from the tray.
Load new paper then click [OK], or click [Force] if the forced
print operation is needed.
2112 The rear roll is out of paper.
Remove the paper from the tray.
Load new paper then click [OK], or click [Force] if the forced
print operation is needed.
2114 Paper is out or not loaded correctly.
Load paper: Width = xxxxmm, Type = xxxx, and then click [OK].
2115 The front roll is out of paper or not loaded correctly.
Load paper: Width = xxxxmm, Type = xxxx, and then click [OK].
2116 The rear roll is out of paper or not loaded correctly.
Load paper: Width = xxxxmm, Type = xxxx, and then click [OK].
Troubleshooting
Message
111
What to do
Reload the paper, and then click OK.
U "When the Paper Jams" on page
120
Check the position of the paper width
guides, reload the paper, and then
click OK.
U "Replacing Paper" on page 26
Load new paper, and close the cover.
If an error is displayed on the Client
PC, click OK.
Click Force if the forced print
operation is needed.
U "Replacing Paper" on page 26
Load new paper, and then click OK.
U "Replacing Paper" on page 26