Toshiba Satellite A210 Series Maintenance Manual page 147

4 Replacement Procedures
Installing the Expansion Memory Module
CAUTION: Do not touch the connectors on the expansion memory module or on the
computer. Debris on the connectors may cause memory access problems.
Follow these steps to install a memory module:
1. Set the computer to boot mode and turn off the power.
2. Remove the black captive screw, with the RAM door, securing the memory module
socket cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Fit the module's connectors into the computer's connectors at about a 45-degree angle
and press the module carefully to ensure a firm connection.
5. Push the module down so it lies flat. The latches on either side will click into place to
secure the module.
4-18 Minnesota 10A/10AG Series Maintenance Manual