Power Cable - NEC NC900C User Manual

6. Appendix

6-7. Power Cable

Ask your dealer for the power cable to select and purchase.
NOTE
Power Cable Electrical Specification
The projector is equipped with an IEC60320 C19 connector to connect an AC power supply cable. Ensure that the AC power
cables that connect the connectors built into the projector to the AC power mains have the current capacities as shown below.
Power supply voltage
AC 100–130V
AC 200–240V
Type of Power Cable
Use plugs, cables, and connectors that are suitable for the regulations of the country of installation, as shown in the following
table.
For users in North America
NOTE
Use a power cable no longer than 4.5m/14.76 ft according to National Electrical Code.
Germany
Plug
CEE 7
USA
Plug
NEMA 5-15P
78
Projector input current
10.3 to 7.9A
5.1 to 4.3A
Plug
Cable
H05VV-F 3G1.5
Cable
SJT 3 x AWG 14
125V 15A or higher
250V 15A or higher
250V 15A or higher
Cable
Connector
Connector
IEC 320 C19
Connector
IEC 320 C19
Power cable current capacity