NEC NC900C User Manual page 38

4. Using Menus
When not displaying menus, the following screen is normally displayed.
When in standby
When the projector is in a standby state (the main power switch in on), the following is displayed.
When power is turned on
When the power is turned on, the following is displayed.
TIP
When the lamp mode is set to "Dual" (both lamp 1 and lamp 2 turned on; see page 44), the display switches
between the lamp 1 and lamp 2 usage times every 10 seconds.
When the power is turned off
When you press the POWER button on the control panel of the projector for 3 or more seconds, the projector starts cooling.
When cooling finishes, the projector enters the standby mode. The amount of time remaining for cooling is displayed as shown
below during cooling.
When a button is pressed while the key lock function is on
If a button on the control panel is pressed while the key lock function is on, the following is displayed and the button will not
function.
38
← Displays the lamp mode and lamp output (%).
← Displays the lamp usage time.
← Displays the selected title.
← Displays the selected video input port.