SIB
Displays the model name and version information about the signal input board (SIB). When the projector is in standby mode,
the version information displays "---".
IMB
Displays the vendor name and version information about the media block (IMB). When the projector is in standby mode, the
vendor name is blank and the version information displays "---".
Slave
Displays the slave firmware version of the projector.
Ballast
Displays the ballast firmware version of the projector. The version information is displayed in the format "ballast 1/ballast 2".
4-6-6. IP Address
Displays the IP address set in the projector.
System
← Displays the model name of the signal input board.
← Displays version information.
← Displays the vendor name.
← Displays the version information.
← Displays the version information.
← Displays the version information.
← Displays the IP address.
Displays the IP address set for the projector (System).
4. Using Menus
49