Replacing The Lamp - NEC NC900C User Manual

5. Maintenance of Your Projector
5-3-3. Procedure for Replacing the Lamp and Air Filter
• Step 1
Replace the lamp (See page 54)
• Step 2
Replace the rear air filter (See page 59)
Replace the side air filter (See page 62)
• Step 3
Reset the lamp usage time and air filter usage time (See page 64)

5-3-4. Replacing the Lamp

This section describes the procedure for replacing both of the lamps.
Preparation: Have a Phillips head screwdriver ready.
1
Remove the lamp cover.
1. Loosen the screw securing the lamp cover until the Phillips screwdriver goes into a free-
wheeling condition.
The screw is not removable.
2. Grasp the standoff pillar of the screw securing the lamp cover and pull it up towards you to
remove the lamp cover.
54