Sending A Data Or Fax Call; Receiving A Data Or Fax Call - Motorola M800 - Car Cell Phone User Manual

Sending a Data or Fax Call

Use this procedure to send data or a fax from a connected device.
Connect your phone to the device, as described in the last pages, and afterwards
do the following:
Do this
1
Check the phone
2
Open the application on your
computer
3
End the call from the
connected device

Receiving a Data or Fax Call

Use this procedure to transfer data or a fax to your portable computer. Connect
your phone to the device as described on page 108.
Find the Feature
Do this
1
Press CHANGE ( )
2
Press
3
Press SELECT ( )
4
Connect your phone to the
device
To
Make sure that the phone is connected
and powered on
Place the call through the application
(such as dial-up-networking or fax).
Note: You cannot dial data or fax
numbers through your phone's keypad.
You must dial them through your
computer.
Close the call and connection when the
transfer is complete
> Settings
> Connection
> Incoming Call
To
Select Next Call
Scroll to Data In Only or Fax In Only
Set the call format
Enable the data or fax transfer
Data and Fax Calls - 107