Table of Contents
Advertisement
Problem
Solution
I plugged the data cable
The beep indicates that you are set up correctly. If
into my phone but my
you did not hear a beep, make sure that both ends
phone did not beep. How
of the data cable are connected - the smaller end
do I know if the data cable
to your phone and the larger end to your computer.
is ready to go?
Also, your computer may have deactivated the port
to save power. Try opening an application that
uses the port, like a fax or dial-up application, to
automatically activate the port.
My phone beeped when I
You must be in an area with digital coverage.
attached the data cable,
Check your phone's display for the digital signal
but my data and fax
indicator (
applications don't work.
support data or fax transmission.
If you see the digital indicator, but you are roaming
on an unfamiliar network, this may be the case.
Also, remember that data and fax transmission
usually requires a subscription. Call your service
provider for more information.
When sending data with
19,200 Kbps is the data transfer rate of the
the data cable, why does
connection between your computer and the phone.
the computer show a
The rate of the connection between your phone
connection rate of 19,200
and the network is displayed on your phone, and
Kbps?
will be either 14400 or 9600 Kbps.
I can't end my data call by
Try pressing
closing the application on
turning off the phone. If possible, always close the
my computer. What can I
connection through your computer, as these
do?
alternative methods may disrupt the application on
your computer.
I launched the micro-
You may be in an area without service. If you have
browser but the display
wireless service, look in the display for the digital
says:
Service Not
signal indicator
Available.
indicator, you may be in an area that has only
analog service or no service at all. If you see the
digital signal indicator, you may be connected to a
digital network that does not support Internet
access.
I launched the micro-
Try again in a few minutes. The servers may be
browser but the display
temporarily busy.
says:
Data Server
Unavailable.
). Some wireless networks may not
. Or try disconnecting the cable or
(
)
. If you do not see the
Troubleshooting - 115
Advertisement
Table of Contents
