Multi-Zone Operations; Turning The Power On And Off; Selecting The Input Source; Adjusting The Volume - Denon AVR 689 - AV Receiver Owner's Manual

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT>
<ZONE2 ON/OFF>
<ZONE2 / REC SELECT>
[Front]
[SOURCE
SELECT]
[VOLUME]
[MUTING]
[SOURCE
CONTROL 2]
[SOURCE
CONTROL 1]


Multi-zone Operations

BUTTON

Turning the Power On and Off

<BUTTON>
[BUTTON]
GOperation on the main unitH
<ZONE2 ON/OFF>
Press
GOperation on the remote control unitH
[ZONE2 ON]
Press
When using ZONE2, it is possible to turn the power for the MAIN
ZONE only on or off by pressing

Selecting the Input Source

GOperation on the main unitH
<ZONE2 / REC SELECT>
Press
GOperation on the remote control unitH
[SOURCE CONTROL 1]
Set
[Rear]
"ZONE2".
[SOURCE SELECT]
Press
[ZONE2 OFF]
[ZONE2 ON]
[MAIN ON]

Adjusting the Volume

[MAIN OFF]
[SOURCE CONTROL 1]
Set
[SOURCE
"ZONE2".
[VOLUME]
Press
SELECT]
[Variable range]
With ZONE2, only the
buttons indicated in this
illustration can be operated.
The ZONE2 volume can be adjusted only when "ZONE2" is selected
NOTE
at "System Setup" – "Option Setup" – "Amp Assign" (vpage 28).
Buttons other than these
cannot be operated.
for the zone to be operated.
[ZONE2 OFF]
or .
[MAIN ON] [MAIN OFF]
or .
<SOURCE SELECT>
, then turn .
[SOURCE CONTROL 2]
to "AUDIO" and
.
[SOURCE CONTROL 2]
to "AUDIO" and
.
– – – –70dB ~ –40dB ~ +18dB

Turning off the Sound Temporarily

[SOURCE CONTROL 1]
Set to "AUDIO" and
"ZONE2".
[MUTING]
Press .
b To cancel, either adjust the volume or press
The setting is canceled when the zone's power is turned off.
The source selected for ZONE2 is also output from the recording
output connectors.
NOTE
Digital audio signals input from the COAXIAL or OPTICAL connectors
cannot be played in multi-zone.
to
to
[SOURCE CONTROL 2]
to
[MUTING]
again.