Operations During Playback; Playing Video And Audio Equipment; Basic Operation; Listening To Fm/Am Broadcasts - Denon AVR 689 - AV Receiver Owner's Manual

Operations During Playback

Adjusting the Master Volume
<MASTER VOLUME>
Either turn
VOLUME]
.
[Variable range] – – – –80.0dB ~ +18.0dB
NOTE
The adjustable range will differ depending upon factors such as the
type of input signal and the channel level setting.
Turning Off the Sound Temporarily (Muting)
[MUTING]
Press .
[MUTING]
To cancel, press again. Muting can also be canceled by
adjusting the master volume.
Listening with Headphones
Plug the headphones into the PHONES jack on the main
unit.
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
Be careful not to set the volume too high when using headphones.
Switching the front speakers
<SPEAKERS>
Press .
Front A Front B
Front A+B
Video Select Function
Switch video input source while listening to audio signal.
<VIDEO SELECT> [V.SEL]
Press or
picture appears.
<VIDEO SELECT>
b To cancel, press to select "SOURCE".
Checking the currently playing program source, etc.
<STATUS>
Press
The current program source and various settings are indicated on
the display.
[MASTER
or press
For details, refer to "Information" (vpage 38).
Switching the brightness of the display
<DIMMER>
Press
When setting to "OFF", the display brightness of the menu setting in
operation changes to "Dark".
Playing Video and Audio
Equipment

Basic Operation

1
Prepare the equipment.
q Load the DVD, CD or other software in the player.
(vSee the operating instructions of the respective devices.)
w To play a video device, switch the monitor input.
(vSee the monitor's operating instructions.)
2
SOURCE SELECT
Use
3
Start playback.
(vSee the operating instructions of the respective devices.)
The remote control unit can be used to operate external devices.
See "Remote Control Unit Operations" (vpage 47).
until the desired
.
.
Bright Dim
OFF Dark
to select the input source.

Listening to FM/AM Broadcasts

Basic Operation
1
<SOURCE SELECT>
Either turn or press
select "TUNER".
2
[SOURCE CONTROL 1]
Set to "AUDIO" and
CONTROL 2]
to "TUNER".
(vpage 47 "Remote Control Unit Operations")
3
BAND
Press to select "FM" or "AM".
4
Tune in the desired broadcast station.
q To tune in automatically (Auto Tuning)
[MODE]
Press to light the "AUTO" indicator on the display, then
TUNING
use to select the station you want to hear.
w To tune in manually (Manual Tuning)
[MODE]
Press to turn off the display's "AUTO" indicator, then use
TUNING
to select the station you want to hear.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
frequencies continuously.
ENGLISH
[TUNER]
to
[SOURCE
TUNING
to change
0