Information - Denon AVR 689 - AV Receiver Owner's Manual

Information

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<STATUS>
Information on the main unit's various settings (Status) and on input
signals (Audio Input Signal) is shown on the display.
The information displayed changes each time you press
The information is displayed for several seconds before the display
BUTTON
returns to its original condition.
<BUTTON>
[BUTTON]
[Items to be checked]
• Surround Mode
• Input signal
• Dialogue normalization
• Input function
• Input digital terminal
• Audio Delay
• Tone Control
• Channel level of each speaker
• Cinema EQ
• Night Mode
etc.
Dialogue normalization function
This is automatically activated when playing Dolby Digital sources.
This function automatically corrects the standard signal level for
individual program sources.
The correction value can be checked using
O F F S E T
The fi gure is the correction value when the standard level is
corrected.
• The items displayed will differ depending upon the current settings,
the presence or absence of an input signal or the type of input signal,
etc.
• For details of the content of the items displayed, refer to the page
containing an explanation of the settings.
<STATUS>
.
<STATUS>
.
- 4 d B
ENGLISH