RocketFish RF-WHD210 User Manual page 4

Transmitter front/top panel
Item Description
1 HDMI 4—When the indicator is on this HDMI port is in use.
2 HDMI 3—When the indicator is on this HDMI port is in use.
3 HDMI 2—When the indicator is on this HDMI port is in use.
4 HDMI 1—When the indicator is on this HDMI port is in use.
5
Power and link status indicator ( )
• Blinking—The power is on and the transmitter is searching for the receiver
or is in sleep mode.
• On—The transmitter and receiver are linked.
• Off—The power is off.
Transmitter back panel
Item Description
1 DC IN jack—Connect the power adapter labeled "transmitter" to this jack.
2 Power switch—Turns the transmitter on or off.
3 HDMI/WVAN switch— A quick press (<1 second) toggles the HDMI switch input
to select the next HDMI input. A long press (>3 seconds) toggles WirelessHD
output between one or more WirelessHD receivers in the same room.
4-7 HDMI input—Connect up to four HDMI source devices to the HDMI inputs using
high-speed HDMI cables.
4
Receiver front/top panel
Item Description
1
Power and link status indicator ( )
• Blinking—The power is on and the receiver is searching for the transmitter
or is in sleep mode.
• On—The transmitter and receiver are linked.
• Off—The power is off.
Receiver back and side panels
Right side view
Left side view
Item Description
1 HDMI jack—Connect this port to an HDMI input on the TV or projector, using a
high-speed HDMI cable.
2 DC IN jack—Connect the power adapter labeled "Receiver" to this jack.
3 Power switch—Turns the receiver on or off.
4 Cable routing clips - Insert HDMI cable into these clips for receiver placement
stability.
1
Back view