Table of Contents
Advertisement
Design Spot 1400E™
Mounting points
Overhead mounting requires extensive experience, including amongst others calculating
working load limits, a fine knowledge of the installation material being used, and periodic
safety inspection of all installation material and the fixture. If you lack these qualifications, do
not attempt the installation yourself. Improper installation can result in bodily injury.
CAUTION!
Be sure a qualified electrician performs all electrical connections.
Be sure to complete all rigging and installation procedures before connecting the main
power cord to the appropriate wall outlet.
Clamp Mounting
The Design Spot 1400E™ provides a unique mounting bracket assembly that integrates the
hanging yoke as well as the safety cable rigging point in one unit (see the illustration on the
next page). When mounting this fixture to truss be sure to secure an appropriately rated
clamp to the hanging yoke using a M10 screw fitted through the center hole of the hanging
©Elation Professional®
15
Design Spot 1400E™
Advertisement
Table of Contents
