Scaling; Setting Scaling On The Page; Booklet; Printing A Booklet - Kyocera FS-6525MFP Driver Manual

5
6

Scaling

Setting Scaling on the Page

1
2
3

Booklet

Printing a Booklet

1
2
3
Printer Driver
Click OK to return to the Print dialog box.
Click OK to start printing.
Scaling increases or decreases text and graphics on a page. You can also
select a gutter setting in the Finishing tab that enlarges the margins to
accommodate stapling or manual hole punching.
Scaling is unavailable when other Layout tab options are selected.
You can increase or decrease text and graphics on a page.
In the Layout tab, type or select a scaling percentage between 20 to 500.
Scaling adjusts proportionately the height and width of the page. A lower
percentage reduces the page and a higher percentage enlarges the page.
Click OK to return to the Print dialog box.
Click OK to start printing.
Booklet prints a two-page layout on both sides of each sheet of paper. You can
fold and bind the booklet in the center. Folded booklets are half the size of the
selected paper. For example, if you select Letter in Basic > Paper > Print size,
the printed output can be folded into a 5.5 x 8.5 inch-size booklet.
When Booklet is selected, other Layout tab options are unavailable.
A different paper source can be selected for the booklet cover. To include a
cover on the booklet, select the Publishing tab, then select Cover mode.
You can print a booklet.
In the Layout tab, select Booklet, and one of the two binding options.
Left edge binding
This selection prints text that reads from left to right.
Right edge binding
This selection prints text that reads from right to left.
Click OK to return to the Print dialog box.
Click OK to start printing.
Layout
5-2