Lock Settings - Kyocera FS-6525MFP Driver Manual

Fs-6525mfp/6530mfp printer driver guide
Hide thumbs Also See for FS-6525MFP:
Table of Contents

Advertisement

Selecting SNMP Settings
1
2
3
4
5
6

Lock Settings

Printer Driver
This option provides a cryptographic hash function with a 128 bit hash value.
It adds security and protection against Gateway Load Balancing Protocol
(GLBP)-spoofing software.
SHA1
This option produces a message digest that is 160 bits long. SHA1 is the
successor to MD5.
Privacy
This option uses encryption for secure communication. It is available after you
select the Authentication option. You may select one Privacy option.
DES
This option uses the Data Encryption Standard for encryption. DES turns
cleartext into ciphertext via an encryption algorithm. It encrypts and decrypts
data using 8-byte blocks and a 56-bit key.
AES
This option uses the Advanced Encryption Standard for encryption. AES is a
symmetric block cipher that can process data blocks of 128 bits, using cipher
keys with lengths of 128, 192, and 256 bits. It is more secure than DES.
These settings in the driver must be set to match the settings in the printing
system's Command Center RX.
In Device Settings > Administrator > General, click SNMP Settings.
Select SNMPv1/v2c or SNMPv3.
For SNMPv1/v2c, type the Read community name and Write community
name, to a maximum of 32 characters, and click OK.
For SNMPv3, type a User name to a maximum of 32 characters, and a
Password from 8 to 32 characters.
To set authentication and privacy options for SNMPv3, click Settings.
In the dialog box, select from the available options.
Click OK.
Optional: Under Apply to other models, you can select from the list of
available models. You can also click Select All or Clear All.The SNMP settings
are applied to all selected models.
An administrator can specify settings at the tab or feature level in the driver, and
then lock them. The settings are then applied to all print jobs, and changes are
restricted. The settings are locked in Device Settings > Administrator
Settings > Lock Settings. For example, a driver setting could be set for
printing duplex documents. This would save paper, resulting in cost savings and
ecological benefits.
Locking a setting will also lock the feature where it appears in other tabs. For
example, selecting Lock Multiple pages per sheet will also select and lock that
feature in the Quick Print and Layout tabs.
Device Settings
2-6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-6530mfp

Table of Contents