Table of Contents
Advertisement
3
Make a network connection
This section describes how to configure the HP Jetdirect ew2500 802.11g Wireless Print Server with
either a wired or wireless network connection to your network.
NOTE:
You can use a wired network connection to configure either wired or wireless settings. HP
recommends that you use a wired connection to configure wireless settings.
Configuration procedures:
●
To configure wireless settings using the included network (LAN) cable, go to
network using the network (LAN) cable on page
●
To configure settings for a wired network, go to
on page
●
To configure settings for an Apple Macintosh wireless computer, go to
wireless computer on page
●
To configure wireless settings without a network (LAN) cable, go to
without a network (LAN) cable on page
●
For optional methods, go to
Configure a wireless network using the network (LAN)
cable
For wireless operation, the print server needs to be connected to your wireless network before you can
discover and install the printer on your PC or other network system.
You can configure the wireless settings with the included network (LAN) cable, which can be removed
after you have completed configuring the wireless settings.
NOTE:
HP recommends that you configure the wireless settings using a network (LAN) cable (wired).
Although you can configure without a network cable (wireless), it is generally easier to configure using
the included network (LAN) cable.
After connecting the cable, allow up to 30 seconds for the cable connection to be enabled. When
disconnecting the cable after configuration, allow up to 30 seconds for the wireless connection to enable
automatically.
ENWW
17.
18.
Optional wireless connection setup methods on page
13.
Configure settings for a wired network
18.
Configure a wireless network using the network (LAN) cable
Configure a wireless
Use an Apple Macintosh
Configure a wireless network
21.
13
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
