Gigabyte GA-990FXA-UD3 User Manual page 93

For the Marvell 88SE9172:
Turn off your computer and replace the failed hard drive with a new one. Restart your computer. To enable an
automatic rebuild in the operating system, you have to set the new hard drive as a Spare drive in the RAID
setup utility first.
• Enabling Automatic Rebuild
Step 1:
When the message "Press <Ctrl>+<M> to enter BIOS Setup or <Space> to continue" appears, press <Ctrl> +
<M> to enter the RAID setup utility. On the main screen, press <Enter> on the RAID tab and then press <En-
ter> on Spare Management.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Selection] [ Adapter]
ENTER/SPACE: Select, ESC: Back/Exit
Step 2:
The new hard drive will be displayed on the screen. Press <Enter> or <Space> on the new hard drive to select
it and then press <Enter> on NEXT. When prompted, press <Y> to confirm. The new hard drive is now set as a
Spare drive.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Selection] [ Adapter]
Spare Management
Port Disk Name
* S0 SATA: WDC WD800JD-22LSA0
NEXT
ENTER/SPACE: Select, ESC: Back/Exit
[ Devices] [ RAID ]
RAID Config
Create VD
Delete VD
Wipe out disk
Spare Management
[ Devices]
[ RAID ]
RAID Config
Size Max Speed
76.3GB SATA 3Gb/s FREE
- 93 -
Status
Appendix