Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-990FXA-UD3 User Manual

2-3

MB Intelligent Tweaker(M.I.T.)

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
CPU Clock Ratio
CPU NorthBridge Freq.
Core Performance Boost
(Note)
CPB Ratio (Note)
Turbo CPB
(Note)
CPU Host Clock Control
x CPU Frequency(MHz)
PCIE Clock(MHz)
HT Link Width
HT Link Frequency
Set Memory Clock
x Memory Clock
 DRAM Configuration
******** System Voltage Optimized ********
System Voltage Control
x CPU PLL Voltage Control
x DRAM Voltage Control
x DDR VT Voltage Control
x NB Voltage Control
higf: Move Enter: Select
F5: Previous Values
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
x HT Link Voltage Control
x NB/PCIe/PLL Voltage Ctrl
x CPU NB VID Control
x CPU Voltage Control
Normal CPU Vcore
higf: Move Enter: Select
F5: Previous Values
• Whether the system will work stably with the overclock/overvoltage settings you made is depen-
dent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in
damage to CPU, chipset, or memory and reduce the useful life of these components. This page is
for advanced users only and we recommend you not to alter the default settings to prevent system
instability or other unexpected results. (Inadequately altering the settings may result in system's
failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set the
System Voltage Control item to Auto to optimize the system voltage settings.
(Note) This item is present only when you install a CPU that supports this feature.
MB Intelligent Tweaker(M.I.T.)
[Auto]
[Auto]
[Enabled]
[Auto]
[Disabled]
[Auto]
200
[Auto]
[Auto]
[Auto] 2000Mhz
[Auto]
x6.66 1333Mhz
[Press Enter]
[Auto]
Auto
Auto
Auto
Auto
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
MB Intelligent Tweaker(M.I.T.)
Auto
Auto
Auto
Auto
1.3250V
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 35 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup